Terz NITE-TX1XS

The NITE-TX1XS82 is a Cross-Technology Switch that combines two Ethernet technologies on eight D-coded M12 ports: Standard Ethernet and Single Pair Ethernet. These T1|TX Data-Hybrid ports allow for the flexible networking of all Ethernet participants. Through the T1|TX Auto-Detection mode, Standard Ethernet and Single Pair Ethernet devices can be connected, regardless of whether they are MASTER or SLAVE devices. The switch features two X-coded M12 Gigabit ports through which data is forwarded with high bandwidth. One of the two uplink ports provides a bandwidth of 2.5 Gbit/s according to the IEEE 2.5GBase-T standard. The Plug&Play switches enable reliable Ethernet communication directly in the application, thus saving space in the control cabinet and reducing wiring effort.

Specifications

Switch:
IEEE802.3 Store and Forward; non-blocking wire speed

Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes

Frame size:
1,522 Bytes

MAC table size:
2,000 addresses

Quality of Service:
Yes

Energy Efficient Ethernet:
No

Flow Control:
Yes

PROFINET suitable:
Yes



Port count (X-cod. + D-cod.)	2+8
MTBF (SN 29500, Mio. h)	2.223





Frame Forwarding (Art.-No.)	xxxxx0
LLDP, PTCP Delay 01:80:C2:00:00:0E	Forwarding
RSTP BPDU 01:80:C2:00:00:00	Forwarding

Nominal voltage:
Vin 24 VDC

Permitted voltage range:
9 to 36 VDC

Connection type:
Vin M12 A-cod. (Pin1,2+|Pin3,4-) | M4 (FE)

Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)

Redundant power supply:
No

Inrush current limiter:
No

Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC/VDC

Polarity protection:
Yes

Power failure bridging:
5 ms

PCB Conformal Coating:
Yes

Protection category:
III

Isolation:
1.5 kVDC Vin ⟺ Ethernet Ports | 2 kVDC Vin ⟺ housing



Port count (X-cod. + D-cod.)	2+8
Power consumption (W)       Idle | full load	0,72 | 2,9
Input current (mA)       Idle | full load	30 | 120

Housing material:
Nickel-plated aluminium, stainless steel

Mounting:
M6 hole for wall mounting, round head screw

IP Protection class (operation):
IP65/67



Port count (M12)	2+8
Width (mm)	65
Height (mm)	180
Depth (mm)	29,8
Weight (g)	470

IEEE Standards:
802.3 10BaseT, 100BaseT(x)

Isolation:
1 kVDC Eth. Port ⟺ housing | 2 kVDC Port ⟺ Port

Connection type:
M12 D-coded

Port count | Speed:
8 | 10/100 Mbit/s TX & 100 Mbit/s T1

Cable length:
TX 100 m (Twisted Pair, 0,14 mm² - 0,22 mm², Cat 5) T1 15+ m (Twisted Pair)

IEEE Standards:
802.3 100BaseT(X), 1000BaseT, 2.5BaseT

Isolation:
1 kVDC Eth. Port ⟺ housing | 2 kVDC Port ⟺ Port

Connection type:
M12 X-coded

Ports | Speed:
1 | 100/1000 Mbit/s + 1 | 100/1000/2500 Mbit/s

Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)

Operating temperature:
-40°C to +70°C

Storage temperature:
-40°C to +85°C

Relative humidity (operation):
0%-95% (not condensing)

Relative humidity (storage):
0%-95% (not condensing)

Atmospheric pressure (operation):
2,000 m (795 hPa)

EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024

EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032

Mechanical stability:
DIN EN 61373

Fire protection:
DIN EN 45545

CE, DIN EN 50155, DIN EN 60950-1, ITxPT

LED:
Power | Link/Activity/Speed per Port

Ordering Information

• Terz NITE-TX1XS Datasheet (431.0 kB)
• Terz NITE-TX1XS Datasheet (ger) (421.8 kB)